To add any network using Clickdealer, please follow these steps:

Click on Integration > Networks from the left menu bar and then "Create" in the top right corner.

This will lead you to the following step-by-step configuration:

Step 2 Configure Tracking Link

By default, Swaarm suggests the most common Advertiser Click Parameter on the left to be matched to the Swaarm Click Macros on the right. You can add more parameters and macros based on the requirements, or come back anytime for any modification you need.

To get to know more about Swaarm supported Advertiser tracking macros, please go through the following article below:

Step 3 Configure Fields

Select what fields you want constantly to be updated or not from the Advertiser API.

To explore more of this step, go to this article here.

Have a snapshot of the offers that will be synced from the advertiser once the integration is activated. You need to click on "Syncing" and "Save Network" to start syncing between Swaarm and the Network. It might take a couple of minutes to start syncing the live offers on the Offer Imported page.

Recommended Postback

The postback below is recommended to be integrated on the network:

Note: Please adjust your postback URL domain name based on your Swaarm platform and click ID macro based on the parameter where you are passing click ID through the advertiser tracking link. For example, if you are passing your Swaarm click ID in "&sub5" parameter, then you need to place "click_id={sub5}" in your postback.

Make sure the click_id, event_id, and sale_amount is integrated on the network side so that events are tracking successfully on your Swaarm Platform