To add any network using Dlab, please follow these steps:
Click on Integration>Networks from the left menu bar and then +Create in the top right corner
This guide will lead you to the following step-by-step configuration:
Step 1: Configure API
Select Dlab Adapter
Insert the API key provided by Advertiser
Step 2 Configure Tracking Link
By default, Swaarm suggests the most common Advertiser Click Parameter on the left to be matched to the Swaarm Click Macros on the right. You can add more parameters and macros based on the requirements, or come back anytime for any modification you need.
Step 3 Configure Fields
Select what fields you want constantly to be updated or not from the Advertiser API.
To explore more of this step, go to this article here.
Step 4 Preview
Have a snapshot of the offers that will be synced from the advertiser once the integration is activated. You need to click on Syncing and Save Network to start syncing between Swaarm and the Network. Syncing might not be enabled if any configuration is not correctly inserted on the first step.
Once the network is saved, It might take a couple of minutes to start syncing the live offers on the Offer Imported page.
Recommended Postback
The postback below is recommended to be integrated on the network:
https://track.yournetwork.swaarm-clients.com/postback?click_id=[Click ID macro for Advertiser]&event_id=[Event ID macro for Advertiser]&sale_amount=[Sale Amount macro for Advertiser]
Note: Please adjust your postback URL domain name based on your Swaarm platform and click ID macro based on the parameter where you are passing click ID through the advertiser tracking link. For example, if you are passing your Swaarm click ID in "&sub5" parameter then you need to place "click_id={sub5}" in your postback.
Tip
Make sure the click_id, event_id, and sale_amount is integrated on the network side so that events are tracking successfully on your Swaarm Platform
To get to know more about Swaarm supported Advertiser tracking macros, please go through the following article: