Overview
The Bitlabs (Prodege) integration allows you to automatically import offers via API and track conversions via postbacks.
How It Works
Swaarm connects to Bitlabs via API
Offers are imported into Swaarm and appear under Offers Approval
Once approved, offers become active in your platform
Users interact with offers through Swaarm tracking links
Bitlabs sends conversion events to Swaarm via postbacks
Swaarm processes the conversion and applies optimization rules
Prerequisites
Before setting up the integration, make sure you have:
Bitlabs API key
A created Advertiser in Swaarm
Approved offers in the feed
Setup in Swaarm
Step 1: Create Network Integration
Go to Integrations → Networks → +Create
Select:
Advertiser
Adapter: Bitlabs
Enter required credentials:
API Key
Set your margin - used to calculate publisher payout. For example, if your payout is $10 and the margin is 40%, the publisher payout (TheyGet) will be $6.
Step 2: Configure Tracking Link Mapping
By default Swaarm suggests the most common Advertiser Click Parameter on the left to be matched to the Swaarm Click Macros on the right. Use the default mapping unless you have a custom setup.
👉 Full list of Swaarm supported tracking link macros here.
Step 3: Configure fields
Select what fields you want constantly to be updated or just once from the Advertiser API. To explore more this step, go to this article here.
Step 4: Preview and Sync Offers
Enable sync by selecting checkbox
Save the integration by clicking on Save Network
Go to Integration → Offers Approval
Review imported offers
Click Approve to create them in your platform
You can also configure auto-approval rules, for more details go here.
Recommended Postback Setup
The postback below is recommended to be configured in Bitlabs:
https://track.yournetwork.swaarm-clients.com/postback?click_id=(user:uid)&aggregated_event_value=(value:currency)&sale_amount=(value:usd)&txid=(tx)&ip_address=(user:ip:address)&event_id=(offer:task:name)&offer_id=(offer:id)&offer_state=(offer:task:state)&sale_amount_currency=USD&hash=<GENERATED_HASH>
Note
Replace yournetwork with your Swaarm tracking domain.
The hash parameter should be generated according to Bitlabs requirements to ensure secure postbacks.
👉 For more details on Bitlabs API, refer to the Bitlabs Offer API documentation.
Testing the Integration
After setup, validate that tracking is working correctly.
Steps
Share a test link with your Advertiser
Check if the postback was received or not in Conversion Report.